Our Products

"Designing Products to Simplify Home Improvements" means that we design the most innovative, useful, and time-saving products for the home repair and hardware industries in the entire universe!

Instructions for use

  • Mark desired location for hook and drill a hole 2” deep with a 5/32”drill bit.
  • Follow (a) or (b) as appropriate
    • (a) If drill hits ceiling joist, assemble ceiling hook with wood screw and turn clockwise into hole until the hook is flush to the ceiling.  Be careful not to confuse lath for a ceiling joist.
    • (b) Otherwise re-drill the hole with a 9/16” drill bit.  Assemble the threaded rod with the hook on one end and the toggle nut (so the wings will fold towards the hook) on the other.  Attach the captive nut on the same end as the toggle nut to prevent it from coming off.  Collapse the wings on the toggle nut towards the hook and push through hole in ceiling.  Apply slight downward pressure while turning the hook clockwise until it contacts the ceiling and feels snug.

Cautions:

  • Wear eye protection and dust mask when drilling
  • Do not hang anything from hook that is not attached well
  • Maximum recommended weight to hang from hook is 10 lbs.